VoIP Caller PIN and Associated Dial Plan<\/div>\n

PSTN to VoIP Authentication and Features<\/div>\n

PSTN to VoIP Gateway Enable\/Disable<\/div>\n

Caller Auth Method: None, PIN, Caller ID<\/div>\n

Ring Through to FXS Enable\/Disable<\/div>\n

Ring Through Tone \u2013 Configurable<\/div>\n

Caller ID (Bellcore 1) for VoIP Service Access<\/div>\n

Caller ID Enable\/Disable<\/div>\n

PIN Max Retry Settings<\/div>\n

Access Allowed Caller List (No Further Authentication)<\/div>\n

Caller PIN and Associated Dial Plan<\/div>\n

Least Cost Routing (via Outbound VoIP \u2013 Line1 Dial Plan)<\/div>\n

FXO (FXO Behavior)<\/div>\n

VoIP Answer Delay Timer<\/div>\n

PSTN Answer Delay Timer<\/div>\n

VoIP PIN Digit Time-Out Timer<\/div>\n

PSTN PIN Digit Time-Out Timer<\/div>\n

PSTN-to-VoIP Call Max Dur Timer<\/div>\n

VoIP-to PSTN Call Max Dur Timer<\/div>\n

PSTN Ring Through Delay Timer<\/div>\n

PSTN Dialing Delay Timer<\/div>\n

VoIP DIG Refresh Interval Timer<\/div>\n

PSTN Ring Time-out Timer<\/div>\n

PSTN Disconnection Detection<\/div>\n

CPC (Removal of Tip\/Ring Voltage Momentarily)<\/div>\n

Polarity Reversal<\/div>\n

Long Silence (Confugrable Time Setting)<\/div>\n

Disconnect Tone (e.g. Reorder Tone)<\/div>\n

FXO Port Impedance \u2013 Configurable to 16 settings<\/div>\n

Ring Frequency \u2013 Configurable<\/div>\n

SPA to PSTN and PSTN to SPA Gain Settings<\/div>\n

Ring Frequency \u2013 Maximum Setting<\/div>\n

Ring Validation Time Setting<\/div>\n

Tip\/Ring Voltage Adjustment Setting<\/div>\n

Ring Indication Delay Setting<\/div>\n

Operational Loop Current Minimum Value<\/div>\n

Ring Time-out Setting<\/div>\n

On-Hook Speed Setting<\/div>\n

Ringer Impedance Setting<\/div>\n

Line-in-Use Voltage Setting<\/div>\n

( Regulatory Compliance)<\/div>\n

FCC (Part 15 Class B and Part 68) , CE , ICES-003<\/div>\n

(Security)<\/div>\n

Password Protected System Reset to Factory Default<\/div>\n

Password Protected Admin and User Access Authority<\/div>\n

Provisioning\/Configuration\/Authentication:<\/div>\n

HTTP Digest \u2013 Encrypted Authentication via MD5 (RFC 1321)<\/div>\n

Up to 256-bit AES Encryption<\/div>\n

Documentation<\/div>\n

Quick-Start Installation and Configuration Guide<\/div>\n

User Guide<\/div>\n

Administration Guide \u2013 Service Providers Only<\/div>\n

Provisioning Guide \u2013 Service Providers Only<\/div>\n

(Package Contents)<\/div>\n

1 \u2013 SPA3000 Phone Adapter Unit<\/div>\n

1 \u2013 5v Power Adapter<\/div>\n

1 \u2013 RJ45 Ethernet Cable<\/div>\n

1 \u2013 RJ11 Telephone Cable<\/div>\n

(Dimensions:) 4.05 x 1.1. x 3.75 in (102.87 x 27.94 x 95.25 mm) W x H x D<\/div>\n

(Unit Weight): 2.15 lb (0.975 kg)<\/div>\n

(Operating Temp).: 32~113F (0~45C)<\/div>\n

(Storage Temp): -13F~185F (-25~85C)<\/div>\n

(Operating Humidity): 10~90% Non-condensing<\/div>\n

(Storage Humidity): 10~90% Non-condensing<\/div>\n

(Data Networking)<\/div>\n

MAC Address (IEEE 802.3)<\/div>\n

IPv4 \u2013 Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)<\/div>\n

ARP \u2013 Address Resolution Protocol<\/div>\n

DNS \u2013 A Record (RFC 1706), SRV Record (RFC 2782)<\/div>\n

DHCP Client \u2013 Dynamic Host Configuration Protocol (RFC 2131)<\/div>\n

ICMP \u2013 Internet Control Message Protocol (RFC792)<\/div>\n

TCP \u2013 Transmission Control Protocol (RFC793)<\/div>\n

UDP \u2013 User Datagram Protocol (RFC768)<\/div>\n

RTP \u2013 Real Time Protocol (RFC 1889) (RFC 1890)<\/div>\n

RTCP \u2013 Real Time Control Protocol (RFC 1889)<\/div>\n

DiffServ (RFC 2475), Type of Service \u2013 TOS (RFC 791\/1349)<\/div>\n

SNTP \u2013 Simple Network Time Protocol (RFC 2030)<\/div>\n

(Voice Gateway)<\/div>\n

SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)<\/div>\n

SIP Proxy Redundancy \u2013 Dynamic via DNS SRV, A Records<\/div>\n

Re-registration with Primary SIP Proxy Server<\/div>\n

SIP Support in Network Address Translation Networks \u2013 NAT (incl. STUN)<\/div>\n

Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP<\/div>\n

Codec Name Assignment<\/div>\n

Voice (Algorithms )<\/div>\n

G.711 (A-law and \u03bc-law),<\/div>\n

G.726 (16\/24\/32\/40 kbps),<\/div>\n

G.729 A,<\/div>\n

G.723.1 (6.3 kbps, 5.3 kbps)<\/div>\n

Dynamic Payload<\/div>\n

Adjustable Audio Frames per Packet<\/div>\n

Fax (Fax Capability)<\/div>\n

Fax Tone Detection and Pass-Through (Using .711)<\/div>\n

DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)<\/div>\n

Flexible Dial Plan Support with Interdigit Timers and IP Dialing<\/div>\n

Call Progress Tone Generation<\/div>\n

Jitter Buffer \u2013 Adaptive<\/div>\n

Frame Loss Concealment<\/div>\n

Full Duplex Audio<\/div>\n

Echo Cancellation (G.165\/G.168)<\/div>\n

VAD \u2013 Voice Activity Detection with Silence Suppression<\/div>\n

Attenuation \/ Gain Adjustments<\/div>\n

Flash Hook Timer<\/div>\n

MWI \u2013 Message Waiting Indicator Tones<\/div>\n

VMWI \u2013 Visual Message Waiting Indicator via FSK<\/div>\n

Polarity Control<\/div>\n

Hook Flash Event Signaling<\/div>\n

Caller ID Generation (Name & Number) \u2013 Bellcore, DTMF, ETSI<\/div>\n

Music on Hold Client<\/div>\n

Streaming Audio Server \u2013 up to 10 sessions<\/div>\n

Provisioning, Administration & Maintenance:<\/div>\n

Web Browser Administration & Configuration via Integrated Web Server<\/div>\n

Telephone Key Pad Configuration with Interactive Voice Prompts<\/div>\n

Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP<\/div>\n

Asynchronous Notification of Upgrade Availability via SIP NOTIFY<\/div>\n

Non-intrusive, In-Service Upgrades<\/div>\n

Report Generation & Event Logging<\/div>\n

Stats in BYE Message<\/div>\n

Syslog & Debug Server Records \u2013 Per Line Configurable<\/div>\n

(Physical Interfaces):<\/div>\n

1 10baseT RJ-45 Ethernet Port (IEEE 802.3)<\/div>\n

1 RJ-11 FXS Phone Ports \u2013 For Analog Circuit Telephone Device (Tip\/Ring)<\/div>\n

1 RJ-11 FXO Phone Ports \u2013 For a Telco or PBX Connection<\/div>\n

FXS: Subscriber Line Interface Circuit (SLIC):<\/div>\n

Ring Voltage: 40-55 VRMS Configurable l*<\/div>\n

Ring Frequency: 10 Hz \u2013 40 Hz l*<\/div>\n

Ring Waveform: Trapezoidal and Sinusoida l*<\/div>\n

Maximum Ringer Load: 3 REN<\/div>\n

On-hook\/off-hook Characteristics:<\/div>\n

On-hook voltage (tip\/ring): -50 V NOMINAL<\/div>\n

Off-hook current: 25 mA min<\/div>\n

Terminating Impedance: 8 Configurable Settings including<\/div>\n

North America 600 ohms, European CTR21<\/div>\n

Power Supply:<\/div>\n

DC Input Voltage: +5 VDC at 2.0 A Max.<\/div>\n

Power Consumption: 5 Watts<\/div>\n

Switching Type (100-240v) Automatic<\/div>\n

Power Adapter: 100-240v \u2013 50-60Hz (26-34VA) AC Input, 1.8m cord<\/div>\n<\/p><\/div><\/div>